Home → DocuSketch Full Service User Manual → Setting and Connecting to the Camera → Camera and Tripod Set-Up
3.3. Camera and Tripod Set-Up
-
Extend and deploy tripod.
-
Mount Camera on Tripod. If you have a selfie stick, mount the camera on selfie stick then mount the selfie stick on the tripod.
-
Position the Tripod with the Camera to be as close to the center of the room or area you are shooting as possible.
-
Reposition the Set-Up each time you take pictures.
Important Notes:
-
You may want to take note of the camera's exact height which is needed when ordering a 2D Sketch
-
Camera stand by time..
-
It is recommended to maintain Camera and Tripod height all throughout the shoot.
-
If possible, do not place the tripod about 3 feet (1 meter) close to walls. The only exception is tight smaller rooms or spaces.
-
Set the tripod in a way where all the walls in the room are about 7 feet (2 meters) approximately away from the camera if possible. For larger rooms or wide-open areas, taking multiple shots is recommended.
-
Adjust the camera level to ensure that all 3 dimensions are horizontally and vertically aligned.
As an exception to the typical set-up, some users may want to use a Powerbank. Here are some tips:
Plug the Powerbank to the camera.
Coil the wire around the tripod neck and leave the Powerbank hanging below the Tripod.
You may use Twisty Wires to hold the Powerbanks' wires in place.